The Latest Brands & Technology Delivered Worldwide
Worldwide Delivery 30 Day Returns Policy Competitive Prices
Victron Energy

Part Number: 792-ARG10020102

Victron Energy 100-2 Argo FET Battery Isolator|2 Batteries-100A|M8 Bolts|Use Marine & Boats

Only £109.86
IN STOCK
NO QUIBBLE 14 DAY MONEY BACK GUARANTEE!*
Dedicated customer support line
ITEM DISPATCHED FROM OUR UK WAREHOUSE
Don't miss out
only 1 left in stock!
ITEM CONDITION Brand New
 

 

Q-link

Victron Energy Argofet 100-2 FET Isolator - 2 Batteries 100A


PART NUMBER: 792-ARG100201020



Description

Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.

When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.

Example: When a current of 100 A flows through a cable of 50 mm? cross section (AWG 0) and 10 m length (30 ft), the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm? cross section (AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!

Alternator energize input

Some alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage/current from the batteries to the B+, and the alternator will not start. The new Argofet isolators have a special current limited energize input that will power the B+ when the engine run/stop switch is closed.



 

Features

  • Maximum charge current (A): 100
  • Maximum alternator current (A): 100
  • Number of batteries: 2
  • Connection: M8 bolts
  • Weight kg: 1.4
  • Dimensions h x w x d in mm: 65 x 120 x 200


Buy with Confidence from a Victron Energy Authorised Dealer and All Purchases come with a VAT Receipt.